Module Navigation

Clocking In/Out On Your ZK Time Clock

Excerpt From An Article

This article is an excerpt from a more complete article: Setting up your ZK Time Clock

Before you can log your time on your Time Clock, you must click the appropriate F1-2 button (F3-4 If you have enabled Break In/Out), then you can clock in/out through any of the methods listed below.


  • F1 - Check In
  • F2 - Check Out
  • F3 - Break Out
  • F4 - Break In

With a Fingerprint

Press the enrolled finger on the fingerprint scanner.


With a Card

Tap the card on the flashing green light.


With a PIN

Enter the User ID with the number pad, then press M.


Enter the PIN with the number pad, then press M.


Was this article helpful?
0 out of 0 found this helpful