These messages all come from the same step in the CMiC employee sync: mapping an employee's Direct Deposit records from Arcoro into CMiC bank split records. Before any bank record is written, the sync checks that the employee's active direct deposits make sense as a set, for example that there is exactly one NET (full amount) account and that it is last in the priority sequence. If that set-level check fails, none of the employee's direct deposits are written. If the set-level checks pass, the sync then processes each direct deposit one at a time, and a problem with a single record only drops that one record.
Error Messages
| Message text | Direction | Occurs when | Outcome | Fix |
|---|---|---|---|---|
| Duplicate Direct Deposit and will be skipped | Write: Arcoro to CMiC | The employee has the Direct Deposits scope enabled and is not terminated. For one specific active direct deposit record (one that is not marked with an expiration date, and that has both a Priority and a Routing Number filled in), the sync looks in CMiC for a matching basic direct deposit record with the same company code, the same split number as this record's Priority, and the same deposit type (percent or flat/full amount). That matching CMiC record has already been claimed by a different active direct deposit earlier in the same employee's list during this same sync run. | Collection item skipped. Only this one direct deposit record is left unwritten. The rest of the employee's direct deposits, and the rest of the employee record, still sync. | In Arcoro, correct the employee's direct deposits so each active record has a unique Priority and deposit type combination, then run the sync again. |
| Direct Deposit has no Priority which CMIC requires. | Write: Arcoro to CMiC | The employee has the Direct Deposits scope enabled and is not terminated. An active direct deposit record that is not marked with an expiration date has no value in its Priority field. | Collection item skipped. Only this one direct deposit record is left unwritten. The rest of the employee's direct deposits, and the rest of the employee record, still sync. | In Arcoro, enter a Priority (sequence number) on the direct deposit record, then run the sync again. |
| Missing bank routing number for direct deposit | Write: Arcoro to CMiC | The employee has the Direct Deposits scope enabled and is not terminated. An active direct deposit record that is not marked with an expiration date has a Priority filled in, but its Routing Number is empty. | Collection item skipped. Only this one direct deposit record is left unwritten. The rest of the employee's direct deposits, and the rest of the employee record, still sync. | In Arcoro, enter the bank routing number on the direct deposit record, then run the sync again. |
| All direct deposits must have the same deposit type, which would be only percent or only flat amounts with a NET account. The Direct Deposits for the employee will not be processed. Correct data in source system and run sync again. | Write: Arcoro to CMiC | The employee's active direct deposits include at least one record with a flat dollar deposit amount and at least one other active record with a partial deposit percent (greater than zero and less than 100, so not the NET account). Mixing flat-amount and percentage records in the active set is not allowed. | Whole collection abandoned. Every direct deposit for this employee is left unwritten this run. The rest of the employee record still syncs. | In Arcoro, change all of the employee's active direct deposits to use one deposit type only, either all percent with a NET account or all flat amounts with a NET account, then run the sync again. |
| Multiple NET accounts where found for the employee. The Direct Deposits for the employee will not be processed. Correct data in source system and run sync again. | Write: Arcoro to CMiC | The employee has at least one direct deposit record, and more than one active direct deposit record is flagged as the NET (100 percent, full amount) account. | Whole collection abandoned. Every direct deposit for this employee is left unwritten this run. The rest of the employee record still syncs. | In Arcoro, mark only one active direct deposit as the NET/full amount account, then run the sync again. |
| The NET account must be the last one on the Direct Deposits priority sequence. The Direct Deposits for the employee will not be processed. Correct data in source system and run sync again. | Write: Arcoro to CMiC | The employee has more than one active direct deposit record with a Priority filled in, and the active record flagged as the NET (100 percent) account does not have the highest Priority number, meaning it is not last in the sequence. | Whole collection abandoned. Every direct deposit for this employee is left unwritten this run. The rest of the employee record still syncs. | In Arcoro, renumber the employee's direct deposit priorities so the NET/full amount account has the last (highest) Priority number, then run the sync again. |
| CMiC has one or more Advanced direct deposit records with a different deposit type than the source direct deposits ([deposit type]). Direct deposits for this employee will not be synced. Correct the direct deposit setup in CMiC and the source system, then run the sync again. | Write: Arcoro to CMiC, compared against existing CMiC records | The employee has at least one active direct deposit record in Arcoro, and CMiC already has one or more Advanced-type direct deposit records for that employee whose deposit type is filled in and does not match the deposit type (percent or flat/full amount) implied by the employee's active Arcoro records. | Whole collection abandoned. Every direct deposit for this employee is left unwritten this run. The rest of the employee record still syncs. | Correct the deposit type mismatch between the Advanced record in CMiC and the employee's direct deposits in Arcoro so both use the same type, then run the sync again. |
There is a related warning, Duplicate Direct Deposit found, assuming first, that is not covered by this article because it is a warning, not an error. It occurs earlier in the same matching step, when CMiC already has more than one existing basic direct deposit record matching the same company code, split number, and deposit type. When that happens the sync picks the most recently updated one and continues. It is possible to see both this warning and the Duplicate Direct Deposit error for the same employee in the same run: the warning means CMiC already had duplicate matching records before the sync started, and the error means a second incoming direct deposit from Arcoro then also tried to claim that same already-matched record.
Confirming the Error
- Open Sync History and find the sync execution for the run in question.
- Open the step for the CMiC connector.
- Find the entity row for People/Employees and check its Errors column count.
- Open the errors list for that entity row.
- Match on the fixed part of the message text in the table above, ignoring the employee-specific values in brackets or quotes, to confirm which of these messages occurred.
- Note whether the error appears once for the employee (a whole-collection message) or repeated for a specific record (a collection-item message), and check whether the Duplicate Direct Deposit found, assuming first warning also appears for the same employee in the Warnings list.
Resolving the Error
Duplicate Direct Deposit and Will Be Skipped
- In Arcoro, open the employee's direct deposit records.
- Confirm each active record has a distinct Priority and deposit type so no two active records resolve to the same CMiC bank split.
- Save the change and run the sync again.
- Confirm the error no longer appears for this employee in the entity's errors list.
Direct Deposit Has No Priority Which CMiC Requires.
- In Arcoro, open the affected direct deposit record.
- Enter a Priority value.
- Save the change and run the sync again.
- Confirm the error no longer appears for this employee in the entity's errors list.
Missing Bank Routing Number for Direct Deposit
- In Arcoro, open the affected direct deposit record.
- Enter the bank routing number.
- Save the change and run the sync again.
- Confirm the error no longer appears for this employee in the entity's errors list.
Deposit Type Mix, Multiple NET Accounts, and NET Priority Errors
These three messages all abandon the whole direct deposit collection for the employee, so resolve them together against the full set of active records.
- In Arcoro, list every active direct deposit record for the employee.
- Confirm exactly one active record is flagged as the NET/full amount account.
- Confirm every other active record uses the same deposit type as the rest, either percent or flat amount.
- Confirm the NET/full amount record has the highest Priority number of the set.
- Save any changes and run the sync again.
- Confirm none of these three errors appear for this employee in the entity's errors list.
CMiC Has One or More Advanced Direct Deposit Records With a Different Deposit Type
- In Arcoro, confirm whether the employee's active direct deposits use percent or flat/full amount.
- In CMiC, locate the employee's Advanced direct deposit record or records and confirm their deposit type.
- Correct whichever side does not match, in CMiC, in Arcoro, or both, so the deposit type agrees.
- Run the sync again.
- Confirm the error no longer appears for this employee in the entity's errors list.
When to Escalate
If any of the following occur, you may need to reach out to Arcoro support for additional assistance.
- Confirm the source direct deposit data was corrected as described above, but the same error still appears on the next run.
- The Advanced direct deposit type mismatch error persists after both the CMiC record and the Arcoro record have been checked and appear to agree, since this may require someone with direct CMiC access to inspect the Advanced record.
- You cannot locate or edit the Advanced direct deposit record in CMiC themselves.
- The message text in the log does not match any message in this article's table.