Adding a New ZK Time Clock to Core HR

After your ZK Time Clock has been initially set up to communicate with your Core HR account, you will need to add it to the Core HR so they can begin to communicate with each other.

1. Go to the menu, expand Settings, and click Time & Attendance in Core HR.

   

2. Click Settings from the top menu bar.

   

3. Click the Time Clock Config tab.

   

4. Click the ZK US10C Time Clocks tab.

   

5. Click Add Time Clock Device from the Actions drop-down menu.

   

6. Enter the following information:

   

   1. Device serial # found on the back of the Time Clock.
   2. Change the Web Server URL Mode to URL Address from the drop-down menu.
   3. In the Web Server URL Address, enter www.infinityhr.com.
      • If you are a CBIZ Client, please refer to the steps and credentials provided by CBIZ to set up your Time Clock with CBIZ.
   4. Specify the Time Clock Auth Type from the drop-down menu.
      • Card Swipe
      • Fingerprint Reader
      • PIN Entry
7. Click Save when finished.

Additional Information

• Once the clock has been added to your Core HR account, Core HR will send commands for your Time Clock to receive and complete its configuration.
• To view what information is being sent and received by your Time Clock, you can click View Logs from the menu.
• You can click the Refresh button on the View Logs page to see when your Time Clock receives any commands from your account.
• Your Time Clock will connect to your Core HR account every minute to receive any commands sent by your Core HR account.